Below are the operating instructions for the Digital Climate Gauge from Ausclimate.

1. General Description

This Temperature & Humidity Meter has:

• large-character LCD display
• multi-function
• low power consumption
• high stability & accuracy

2. Features:

• display temperature, humidity and time simultaneously
• memory of MAX & MIN measuring value
• 12-hour/24-hour display system selectable
• ℃/℉ unit selectable
• alarm function
• clock & Calendar function (month and date)
• desk-top or Wall Hanging option

3. Specification:

Temperature range:

• temperature: -50 ~ +70℃（ -58 ~ +158℉）
• humidity range: 20%~99%RH
• resolution:

temperature: 0.1℃ (0.1℉)

humidity: 1% RH

• accuracy:

          temperature: ± 1℃（1.8℉）

           humidity: ±5%RH (40%~80%）

• power supply: 1.5V (AAA size) x 1
• product dimension: 100 x 108 x 20 mm
• weight: approx. 160g
• storage condition: -20℃~60℃, 20~80%RH

4. Operation

4.1 Uncover the Battery Compartment Cover according to the arrow direction on it, pull out the insulation paper and push back the cover, then the meter works.

4.2 Key function

[MODE]: switching between CLOCK and ALARM display setting time, alarm, 12-hour/24-hour displaying and date

[ADJ]: adjust value of the setting

[MEMORY]: display or clear memorized MAX and MIN value of TEMP. and HUMIDITY [RESET]: clear all set and memorized value

[℃/℉]: change tempearture unit between ℃ and ℉

4.3 Press & hold [MODE] key for 2 seconds at starting-up, then minute reading will twinkle, press [ADJ] to adjust MINUTE value, continually press [MODE] key with using [ADJ] to set value of HOUR, 12-hour/24-hour displaying, MONTH and DATE

4.4 At current status (the DOT : between HOUR and MINUTE twinkles), press [MODE] once to change CLOCK display to ALARM function (at this time, the DOT : between HOUR and MINUTE doesn't twinkle), press [ADJ] to turn on or turn off ALARM function and INTEGRAL-HOUR ALARM function, press [MODE] for another 2 seconds to set ALARM time
INTEGRAL-HOUR ALARM function (symbol appears)

4.5 At the mode of ALARM, the meter will return to CLOCK display mode if there is no any operation after 1 minute

4.6 At the mode of CLOCK display, press [ADJ] one time, the CLOCK display will be changed to CALENDAR display (Month and Date), and the meter will return to CLOCK display after 3 seconds

4.7 Press [MEMORY] one time to display memorised MAX value of temperature and humidity, press another time to display MIN value of temperature and humidity. Press [MEMORY] for 2 seconds to clear memorised MAX and MIN value of temperature and humidity

5. Cautions

• Please press [RESET] key when using for first time and after replacing battery
• If any abnormal display appears, please press [RESET] key
• Consider the Environment – please dispose of replaced battery in a responsible manner